Kia Optima Hybrid 2017 Owner's Manual page 508

BLIND SPOT DETECTION SYSTEM (BSD) (IF EQUIPPED)
OUM056176L
The BSD (Blind spot detection) system
uses a radar sensor to alert the driver
while driving.
It senses the rear side territory of the
vehicle and provides information to the
driver.
1. BSD (Blind spot detection)
Warning range is dependent on
your vehicle speed. However, if the
speed of your vehicle is faster by
10 km/h or more than other nearby
vehicles, the warning is not operat‐
ed.
2. LCA (Lane change assist)
When vehicles are approaching to
your vehicle at high speed, the
warning is operated.
3. RCTA (Rear cross traffic alert)
When your vehicle moves back‐
ward, the sensor detects approach‐
ing vehicles to the left or right side
direction and warning is operated.
WARNING
• Always check the road condition
while driving for unexpected situa‐
tions even though the BSD (Blind
spot detection) system is operat‐
ing.
• BSD (Blind spot detection) system
is a system made for convenience.
Do not solely rely on the system
but always pay attention to drive
safely.
BSD (Blind spot detection) / LCA
(Lane Change Assist)
Operating conditions
The indicator on the switch will illumi‐
nate when the BSD (Blind spot detec‐
tion) system switch is pressed with the
engine start/stop button switch ON. If
the vehicle speed exceeds 30 km/h
(18.6 mph), the system will activate.
If you press the switch again, the
switch indicator and system will be
turned off.
If the engine start/stop button switch
is turned OFF and ON the system re‐
turns to the previous state.
7
7-91