Using The Right Bulbs; Replacing Headlamp Bulbs - Mercury 2006 Milan Owner's Manual

Using the right bulbs

Replacement bulbs are specified in the chart below. Headlamp bulbs
must be marked with an authorized "D.O.T." for North America and an
"E" for Europe to ensure lamp performance, light brightness and pattern
and safe visibility. The correct bulbs will not damage the lamp assembly
or void the lamp assembly warranty and will provide quality bulb burn
time.
Function
Headlamp high beam
Headlamp low beam
Front park/turn signal lamp
Front sidemarker lamp
*Rear sidemarker lamp
*Stop/tail lamp
Rear turn signal lamp
Backup lamp
License plate lamp
High-mount brake lamp
Foglamp (if equipped)
Map lamp
Dome/reading lamp
Visor vanity lamp - Slide on
Rail system (SOR)
Puddle lamp (if equipped)
Glove box lamp
Luggage compartment lamp
All replacement bulbs are clear in color except where noted.
To replace all instrument panel lights - see your authorized dealer.
*To replace these lamps - see your authorized dealer.

Replacing headlamp bulbs

Highbeam bulb replacement
1. Make sure headlamp switch is in the OFF position, then open the
hood.
2. Reach over the front bolster.
2006 Milan (mln)
Owners Guide (post-2002-fmt)
USA (fus)
Number of bulbs
2
2
2 3457NAK (amber)
2
N/A
N/A
2
2
2
1
2
2
6
2
2
1
1
Lights
Trade number
H7
H11LL
168
SNAP LED 70
LED
3157 A (amber)
921
168
921
H11
12V6W
578
37
W5W
194
578
39