Motorcraft Part Numbers - Mercury 2006 Milan Owner's Manual

Maintenance and Specifications
• 3.0L DOHC V6 Duratec engine
3. Remove the air filter element from the air filter housing.
4. Wipe the air filter housing and cover clean to remove any dirt or
debris and to ensure good sealing.
5. Install a new air filter element. Be careful not to crimp the filter
element edges between the air filter housing and cover. This could cause
filter damage and allow unfiltered air to enter the engine if not properly
seated.
6. Replace the air filter housing cover and secure the clamps.
Note: Failure to use the correct air filter element may result in severe
engine damage. The customer warranty may be void for any damage to
the engine if the correct air filter element is not used.

MOTORCRAFT PART NUMBERS

Component 2.3L I4 engine
Air filter element FA-1683
Battery BXT-40R
Oil filter FL-2017-B
2
PCV valve
3
Spark Plugs
1
When changing oil filter you must also replace the filter cap O-ring. The
oil filter drain plug O-ring must also be replaced whenever the oil filter
drain plug is removed. Reuse of the O-rings may cause engine oil leakage
and may result in severe engine damage. The customer warranty may be
void for any damage to the engine if the O-rings are not replaced.
2
The PCV valve is a critical emission component. It is one of the items
listed in scheduled maintenance information and is essential to the
life and performance of your vehicle and to its emissions system.
240
2006 Milan (mln)
Owners Guide (post-2002-fmt)
USA (fus)
3.0L DOHC V6 Duratec engine
FA-1771
BXT-40R
1
FL-820-S