Replacing Headlamp Bulbs - Mercury Sable 2004 Owner's Manual

Lights

Replacing headlamp bulbs

To remove the headlamp bulb:
1. Make sure headlamp switch is in
OFF position.
2. Remove the bolt from the
headlamp housing.
3. At the back of the headlamp, pry
up and remove the two retainer pins
to release the headlamp assembly
from the vehicle and pull headlamp
forward.
4. Remove the protective dust shield
from the housing by turning the
dust shield counterclockwise (when
viewed from the rear).
36
2004 Sable (sab)
Owners Guide (post-2002-fmt)
USA English (fus)