Using The Right Bulbs; Replacing Interior Bulbs - Mercury 2010 Milan Owner's Manual

Lights
• Large water droplets, drip marks or streaks present on the interior of
the lens
Take your vehicle to dealer for service if any of the above conditions of
unacceptable moisture are present.

Using the right bulbs

Replacement bulbs are specified in the chart below. Headlamp bulbs
must be marked with an authorized "D.O.T." for North America and an
"E" for Europe to ensure lamp performance, light brightness and pattern
and safe visibility. The correct bulbs will not damage the lamp assembly
or void the lamp assembly warranty and will provide quality bulb burn
time.
Function
* Headlamp beam
* Front park/turn signal lamp
Sidemarker lamp
*Stop/tail lamp
Rear turn signal lamp
Backup lamp
License plate lamp
High-mount brake lamp
Fog lamp (if equipped)
Map lamp
Dome/reading lamp
Visor vanity lamp - Slide on
Rail system (SOR)
Puddle lamp (if equipped)
Luggage compartment lamp
All replacement bulbs are clear in color except where noted.
To replace all instrument panel lights - see your authorized dealer.
* To replace these lamps - see your authorized dealer.

Replacing interior bulbs

Check the operation of all bulbs frequently.
62
Number of bulbs
2
2
N/A
N/A
2
2
2
1
2
2
6
2
2
1
Trade
number
HB3
3457NAK
(amber)
LED
LED
3157 A
(amber)
921
C5W
921
H11
12V6W
578
37 or 14V1CP
W5W
578