Alpha ESS SMILE-BAT-10.3P Quick Installation Manual page 3

Disassemble the battery packaging and battery installation
Open the battery pack.
1-1
Place the battery close to the wall
perpendicular to the floor and drill
holes in the wall using the impact drill
corresponding to the M8*60.
Explosion-proof valve
+ -
1-2 Explosion-proof valve position
Use a Phillips screwdriver to attach the battery mounting hooks to
the battery top cover.
2-1
3-1
M5*10
Note: Please place a protective
layer on the battery when drilling to
prevent dust from falling into the
battery.