Table of Contents
Advertisement
8. Place any wheel covers and ornaments in the
trunk.
9. Put the tire, jack, and wrench away. Make
sure the jack is securely fastened so it does
not rattle when you drive.
10. Unblock the wheels.
11. Turn the air suspension ON (if so equipped).
Installation of the black dust shield
When installing the regular tire, reinstall the
black dust shield by orienting and sliding the
shield until it is flush with the hub/rotor
assembly.
Aluminum wheel
The center wheel ornament
Remove the center ornament from the wheel
with the tapered end of the wheel nut wrench
by inserting it under the notch, and rotating the
handle and then prying against the wheel.
208
Hide quick links:
Advertisement
Table of Contents
