D-Link DIR-825/AC User Manual page 79

DIR-825/AC Wireless AC1200 Dual Band Gigabit Router
User Manual
Figure 62. The page for creating a new Static IPv4 connection. The IPv4 section.
Parameter
IP Address
Netmask
Gateway IP address
Primary DNS server/
Secondary DNS server
Obtain DNS server
addresses
automatically
Primary DNS server/
Secondary DNS server
Vendor ID
Host name
IPv4
For Static IPv4 type
Enter an IP address for this WAN connection.
Enter a subnet mask for this WAN connection.
Enter an IP address of the gateway used by this WAN connection.
Enter addresses of the primary and secondary DNS servers in the
relevant fields.
For Dynamic IPv4 type
Move the switch to the right to configure automatic assignment of
DNS server addresses. Upon that the Primary DNS server and
Secondary DNS server fields are not available for editing.
Enter addresses of the primary and secondary DNS servers in the
relevant fields.
The identifier of your ISP. Optional.
A name of the router specified by your ISP. Optional.
Page 79 of 222
Configuring via Web-based Interface
Description