Firmware Update - D-Link DIR-825/AC User Manual

DIR-825/AC Wireless AC1200 Dual Band Gigabit Router
User Manual

Firmware Update

On the System / Firmware Update page, you can update the firmware of the router and
configure the automatic check for updates of the router's firmware.
!
Update the firmware only when the router is connected to your PC via a wired
connection.
You can view the current version of the router's firmware on the Summary page.
By default, the automatic check for the router's firmware updates is enabled. If a firmware update is
available, a notification will be displayed in the top right corner of the page.
To disable the automatic check for firmware updates, in the Remote update section, move the
Check for updates automatically switch to the left and click the APPLY SETTINGS button.
To enable the automatic check for firmware updates, in the Remote update section, move the
Check for updates automatically switch to the right and click the APPLY SETTINGS
button. By default, in the Remote server URL field, the D-Link update server address is
specified.
You can update the firmware of the router locally (from the hard drive of your PC) or remotely
(from the update server).
Figure 161. The System / Firmware Update page.
Page 204 of 222
Configuring via Web-based Interface