D-Link DIR-825/AC User Manual page 196

DIR-825/AC Wireless AC1200 Dual Band Gigabit Router
User Manual
Parameter
Private port (start)/
Private port (end)
Click the APPLY button.
To edit the parameters of an existing server, select the relevant line in the table. On the opened page,
change the needed parameters and click the APPLY button.
To remove a server, select the checkbox located to the left of the relevant line of the table and click
the Delete button. Also you can remove a server on the editing page.
A port of the IP address specified in the Private IP field to which
traffic is directed from the Public port. Specify the start and the
end value for the port range. If you need to specify one port, enter
the needed value in the Private port (start) field and leave the
Private port (end) field blank.
Page 196 of 222
Configuring via Web-based Interface
Description