D-Link DIR-825/AC User Manual page 119

DIR-825/AC Wireless AC1200 Dual Band Gigabit Router
User Manual
In the Security Settings section, you can change security settings of the wireless network.
By default, the WPA2-PSK network authentication type of both bands of the wireless network is
specified. WPS PIN from the barcode label is used as the network key.
Figure 96. Network authentication types supported by the router.
The router supports the following authentication types:
Authentication type
Open
WEP-64
WEP-128
WPA
WPA-PSK
WPA2
WPA2-PSK
WPA/WPA2 mixed
Open authentication (with WEP encryption for wireless network
modes not supporting 802.11n or 802.11ac devices).
Authentication with a 64-bit shared key with WEP encryption. This
authentication type is not available when a mode supporting
802.11n or 802.11ac devices is selected from the Wireless mode
drop-down list on the Wi-Fi / Basic Settings page.
Authentication with a 128-bit shared key with WEP encryption.
This authentication type is not available when a mode supporting
802.11n or 802.11ac devices is selected from the Wireless mode
drop-down list on the Wi-Fi / Basic Settings page.
WPA-based authentication using a RADIUS server.
WPA-based authentication using a PSK.
WPA2-based authentication using a RADIUS server.
WPA2-based authentication using a PSK.
A mixed type of authentication. When this value is selected, devices
using the WPA authentication type and devices using the WPA2
authentication type can connect to the wireless network.
Page 119 of 222
Configuring via Web-based Interface
Description