Dale Tiffany 8655/551 Assembly Instructions

Available languages

ASSEMBLY INSTRUCTIONS:

Item No: 8655/551

1. Carefully unpack the parts and layout as shown in the

illustration.

2. Insert the harp into the saddle.

3. Place the shade on the harp and tighten with the finial to

secure the shade into place.

4. Adjust the knurl nut on the harp.

This can be used to raise the shade a little if necessary.

5. Insert 100-Watt bulb into the bulb socket.

Uses (1) maximum 100WATT, Type "A" Bulb or

(1) 13WATT, CFL Bulb (Bulb not included)

Note: Not all CFL bulbs are the same in length. Make sure your bulb length is compatible with

the size of the harp. (4 inches or less – total length)

Cleaning of your lamp

Wipe with a damp cloth. Do not use abrasives.

*SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Made in China

FOR RETURN SHIPPING PURPOSES:

PLEASE RETAIN ORIGINAL PACKAGING

TO MINIMIZE DAMAGE.

Revision – 09/10/12

Table of Contents

Do you have a question about the 8655/551 and is the answer not in the manual?

Page 1 FOR RETURN SHIPPING PURPOSES: ASSEMBLY INSTRUCTIONS: PLEASE RETAIN ORIGINAL PACKAGING TO MINIMIZE DAMAGE. Item No: 8655/551 1. Carefully unpack the parts and layout as shown in the illustration. 2. Insert the harp into the saddle. 3. Place the shade on the harp and tighten with the finial to secure the shade into place.
Page 2 INSTRUCIONES DE ASAMBLEA: PARA RAZONES DE REGRASAR: POR FAVOR Modelo # TT80398 CONSERVE EL IMPAQUETADO ORIGINAL PARA REDUCIR DAÑOS MINIMO. 1. Desembale con cuidado las piezas y el diseño, como se muestra en la ilustración. 2. Inserte el arpa a la silla. 3.