Dale Tiffany TT12368 Assembly Instructions

Available languages

ASSEMBLY INSTRUCTIONS:

Item No: TT12368

1. Place the lamp base on a level surface.

2. Screw the socket assembly (A) into the base.

3. Screw the threaded rod (B) into socket assembly (A).

4. Adjust the knurl nut (C) onto the threaded rod (B).This

can be used to raise the shade a little if necessary.

5. Place shade (D) over threaded rod (B), and

tighten finial (E) securing the shade in place.

6. Insert bulbs into the bulb socket.

Recommended (2) maximum 60 WATT Type "A" Bulbs

or (2) maximum 13WATT CFL Bulbs

(Bulbs not included)

Cleaning of your lamp.

Unplug lamp, wipe with a damp cloth.

Do not use abrasives

*SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Made in China

FOR RETURN SHIPPING PURPOSES:

PLEASE RETAIN ORIGINAL PACKAGING

TO MINIMIZE DAMAGE.

Revision – 12/24/12

Table of Contents

Do you have a question about the TT12368 and is the answer not in the manual?

Page 1 ASSEMBLY INSTRUCTIONS: PLEASE RETAIN ORIGINAL PACKAGING TO MINIMIZE DAMAGE. Item No: TT12368 1. Place the lamp base on a level surface. 2. Screw the socket assembly (A) into the base. 3. Screw the threaded rod (B) into socket assembly (A).
Page 2 INSTRUCIONES DE ASAMBLEA: PARA RAZONES DE REGRASAR: POR FAVOR CONSERVE EL IMPAQUETADO ORIGINAL Modelo: TT12368 PARA REDUCIR DAÑOS MINIMO. 1. Coloque la base de la lámpara en una superficie plana. 2. Atornille la asambla de bombilla (A) en la base.