Dale Tiffany 2721/739 Assembly Instructions

ASSEMBLY INSTRUCTIONS:
Item No: 2721/739
1. Place the lamp base on a level surface.
2. Screw the threaded rod (F) into socket assembly (H).
Place the cover (G) over the threaded rod (F). Place the
cap (E) over the cover (G) and tighten with the nut (D).
Place the knurl nut (C) over the nut (D).
3. Adjust the knurl nut (C) onto the threaded rod (F).
This can be used to raise the shade a little if
necessary.
4. Place shade (B) over threaded rod (F), and tighten
finial (A) securing the shade in place.
5. Insert bulbs into the bulb socket.
Recommended (2) maximum 60 WATT Type "A" Bulbs
Or (2) maximum 13WATT CFL Bulbs
(Bulbs not included)

Cleaning of your lamp.

Unplug lamp, wipe with a damp cloth.
Do not use abrasives
*SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Made in China
FOR RETURN SHIPPING PURPOSES:
PLEASE RETAIN ORIGINAL PACKAGING
TO MINIMIZE DAMAGE.
Revision – 07/16/12