Advertisement
Table of Contents
ASSEMBLY INSTRUCTIONS:
Item No: 7560/965
1. Carefully unpack and lay out the parts as shown in illustration.
2. Place the base (A) onto a smooth surface.
Screw the threaded rod (B) into the base (A),
3. Adjust the knurl nut on threaded rod.
This can be used to raise the shade a little if necessary.
4. Place the shade (D) over threaded rod (B).
5. Place the cap (E) over the shade (D) and then tighten with
the finial (F) securing the shade in place.
Recommended (2) maximum 60WATT Type "A" Bulbs
or (2) maximum 13Watt CFL bulbs. (Bulbs not included).
Cleaning of your lamp.
Unplug lamp, wipe with a damp cloth. Do not use abrasives
*SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Made in China
FOR RETURN SHIPPING PURPOSES:
PLEASE RETAIN ORIGINAL PACKAGING
TO MINIMIZE DAMAGE.
Revision - 04/23/13
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Dale Tiffany 7560/965
Summary of Contents for Dale Tiffany 7560/965
- Page 1 ASSEMBLY INSTRUCTIONS: PLEASE RETAIN ORIGINAL PACKAGING TO MINIMIZE DAMAGE. Item No: 7560/965 1. Carefully unpack and lay out the parts as shown in illustration. 2. Place the base (A) onto a smooth surface. Screw the threaded rod (B) into the base (A), 3.
- Page 2 INSTRUCIONES DE ASAMBLEA: PARA RAZONES DE REGRASAR: POR FAVOR CONSERVE EL IMPAQUETADO ORIGINAL Modelo: 7560/965 PARA REDUCIR DAÑOS MINIMO. 1. Cuidadosamente desembale y diseñar las piezas como se muestra en la ilustración. 2. Coloque la base (A) sobre una superficie lisa. Atornille la varilla roscada (B) en la base (A), 3.
Need help?
Do you have a question about the 7560/965 and is the answer not in the manual?
Questions and answers