Automatic Door Locks - Jeep 2009 Wrangler Owner's Manual

2. The transmission was in gear and the vehicle speed
returned to 0 mph (0 km/h).
3. The transmission shift lever is in NEUTRAL or PARK.
4. The driver door is opened.
5. The doors were not previously unlocked.
6. The vehicle speed is 0 mph (0 km/h).
Automatic Unlock Doors on Exit Programming
The "Automatic Unlock Doors On Exit" feature can be
enabled or disabled as follows:
1. Close all doors and place the key in the ignition.
2. Cycle the ignition switch between LOCK and ON and
then back to LOCK four times ending up in the LOCK
position.
3. Depress the power door unlock switch to unlock the
doors.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33
4. A single chime will indicate the completion of the
programming.
5. Repeat these steps if you want to return this feature to
its previous setting.
NOTE: Use the "Automatic Unlock Doors On Exit"
feature in accordance with local laws.

Automatic Door Locks

The doors will lock automatically on vehicles with power
door locks if all of the following conditions are met:
1. The "Automatic Door Locks" feature is enabled,
2. The transmission is in gear,
3. All doors are closed,
4. The throttle is pressed,
5. The vehicle speed is above 15 mph (24 km/h), and
2