Raising The Windshield And Replacing Side Bars - Jeep 2009 Wrangler Owner's Manual

190 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
9. Lower the windshield gently until it contacts the
rubber hood bumpers.
10. Secure the windshield by passing a cinch strap
through the footman hoop on the center of the hood and
on the center of the windshield frame. Tighten the strap
to secure the windshield in place.

Raising the Windshield and Replacing Side Bars

1. Raise the windshield.
2. Loosely attach the rear of the side bar to the sport bar.
Refer to Step 4 of "Lowering Windshield And Removing
• Reattach the sport bar Velcro covering.
Side Bars" earlier in this section.