Setting Memory Positions And Linking Remote Keyless Entry (Rke) Transmitter To Memory - Jeep 2009 Grand Cherokee Owner's Manual

Keyless Entry (RKE) transmitters can also be pro-
grammed to recall the same positions when the UN-
LOCK button is pressed.
Driver Memory Switches
Your vehicle is equipped with two RKE transmitters. One
or both RKE transmitters can be linked to either memory
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125
position. The memory system can accommodate up to
four RKE transmitters, each one linked to either of the
two memory positions.
Setting Memory Positions and Linking Remote
Keyless Entry (RKE) Transmitter to Memory
NOTE: Each time the S (SET) button and a numbered
button 1 or 2 are pressed, you erase the memory settings
for that button and store a new one.
1. Insert the ignition key, and turn the ignition switch to
the ON position.
2. Press the driver door memory button number 1 if you
are setting the memory for driver 1, or button number 2
if you are setting the memory for driver 2. The system
will recall any stored settings. Wait for the system to
complete the memory recall before continuing to Step 3.
3. Adjust the driver's seat, recliner, and driver's sideview
mirror to the desired positions.
3