Setting Memory Positions And Linking Remote Keyless Entry Transmitter To Memory - Jeep 2010 WK Grand Cherokee SRT8 Owner's Manual

Setting Memory Positions and Linking Remote
Keyless Entry Transmitter to Memory
NOTE: Each time the S (SET) button and a numbered
button 1 or 2 are pressed, you erase the memory settings
for that button and store a new one.
1. Insert the ignition key, and turn the ignition switch to
the ON position.
2. Press the driver door MEMORY button number 1 if
you are setting the memory for driver 1, or button
number 2 if you are setting the memory for driver 2. The
system will recall any stored settings. Wait for the system
to complete the memory recall before continuing to
Step 3.
3. Adjust the driver's seat, recliner, and driver's sideview
mirror to the desired positions.
4. Adjust the brake and accelerator pedals to the desired
positions.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 95
5. Turn on the radio and set the radio station presets (up
to 12 AM and 12 FM stations can be set).
6. Turn the ignition switch to the LOCK position and
remove the key.
7. Press and release the S (SET) button located on the
driver's door.
8. Within five seconds, press and release MEMORY
button 1 or 2 on the driver's door. The next step must be
performed within five seconds if you desire to also use a
RKE transmitter to recall memory positions.
9. Press and release the LOCK button on one of the RKE
transmitters.
10. Insert the ignition key, and turn the ignition switch to
the ON position.
3