Main Screen Layout; Population Display; Crop & Variety Selection; Farm & Field Selection - Loup Electronics ELITE Operation Manual

LOUP ELITE DRILL/PLANTER MONITOR • OPERATION MANUAL

Main Screen layouT

POPuLATION DIsPLAy

The primary reading for
Seeds/Ac is an average
of all learned population
sensors.
cROP & VARIETy sELEcTION
To change the type of crop being planted, select
the crop button to enter the Crop Information
Screen. From here select the Crop type, Seeds
Per Pound and Variety you desire. Select "Exit
& Save" to apply the changes made.
Note: The variety information is only used when Tasks/
Mapping features are unlocked and population data is being
logged to SD memory.
fARM & fIELD sELEcTION
To change the Farm and Field information,
select this button to enter the Farm/Field
screen. Enter the Farm and Field names
you desire into the appropriate fields. Select
"Exit & Save" to apply the changes made.
Note: The Farm/Field information is only used when Tasks/
Mapping features are unlocked and population data is being
logged to SD memory

IMPLEMENT sELEcTION

Selecting the Implement from the Main screen will bring you
directly to the Implement Setup screen. From here you may edit
the implement type, make and details such as width or section
info. You may also select a different implement entirely using the
"My Saved Implements" button.
4
sPEED & IcON sELEcTION
Implement Speed will display in lower left corner
of the display. Select the speed icon if you' d like to
change the color of the graphic displayed.

sETTINg A TARgET RATE

To set your Target Rate, select the
window for target icon in the center of
the screen and from the pop-up enter the
desired target in seeds/acre.
Rates of 999,999 or less will appear in
thousands (180,000 displays as 180.0K).
Rates of 1,000,000 or more will appear in
millions (1,200,000 displays as 1.2 M).
cLEARINg fIELD & TOTAL AcREs
To clear either the Total or Field
acres, select the value on screen
you wish to clear and select the
"Confirm' button from the pop-up
message.
Note: These cannot be reset when a task is logging.

TOP DIsPLAy sETuP

The top 4 windows on the main screen can be customized to
display information you want to see. Select the window you wish
to change and from the pop-up window select the readout you
wish to display.
Note: Some Display Options may not be available or displayed
depending on how your implement is configured.