Rear Tail, Stop, Turn Signal, And Back-Up Lights; Center High Mounted Stop Light (Chmsl) - Jeep 2005 Liberty Owner's Manual

Rear Tail, Stop, Turn Signal, and Back-Up Lights

1. Open the swing gate.
2. Remove the two Torx fasteners.
3. Remove rear lamp assembly.
4. Rotate the socket on the back of the lamp housing
counter-clockwise to unlock it.
5. Replace the bulb.
MAINTAINING YOUR VEHICLE 355

Center High Mounted Stop Light (CHMSL)

1. Remove the two screws securing the CHMSL.
2. Twist the bulb socket to remove from the CHMSL
housing.
3. Pull the bulb out of the socket.
4. Replace the bulb, reinstall the socket and reattach the
CHMSL.
7