Jeep 2004 Wrangler Owner's Manual page 70

70 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
6. Open the tailgate.
7. Remove the tailgate bar (black bar with end caps) that
is located in the soft top and set aside.
NOTE: Be sure the wire harness is not attached to the
soft top bows before you lift the top.
8. Lift the soft top fabric up and away from the plastic
header with latches.
9. Pull all of the soft top fabric toward the rear of the
vehicle and wrap around the plastic header.
10. Pull the soft top fabric around the ends of the plastic
header so that the fabric has a tight, smooth appearance.
11. Working from the rear of the vehicle with the tailgate
open, lift the plastic header up and over the sport bar. As
the header reaches the top, locate the 2 bow and push it
up and over the sport bar.