Table of Contents
Advertisement
124 UNDERSTANDING YOUR INSTRUMENT PANEL
5 seconds after pressing the SET button, the station will
continue to play, but will not be locked into push-button
memory.
You may add a second FM station to each push button by
repeating the above procedure with this exception: Press
the SET button twice and SET 2 will appear in the radio
display window. Each button can be set for SET 1 and
SET 2 in the FM mode. This allows for 10 FM stations to
be locked into push button memory. The stations stored
in SET 2 memory can be selected by pressing the push
button twice.
When you are receiving the MW or LW station that you
wish to commit to push-button memory, press SET 1
button. SET 1 will appear in the radio display window.
Select the push-button you wish to lock on this station
and press and release that button.
Operating Instructions - RDS Mode
The following RDS functions can be selected while in
radio mode by pushing the appropriate button.
Time Button
Briefly press the Time button to change the display
between radio frequency and time.
To set the "HOME CLK" use a ballpoint pen or similar
object to press the hour (H) or minute (M) buttons on the
radio, The time setting will increase each time you press
the button. Press any other button to exit from the clock
setting mode.
Any time the hour (H) or minute (M) buttons are pressed
when in the "RDS CLK" mode the clock will automati-
cally switch to the "HOME CLK" mode and only the
home time will be set.
Pressing and holding the TIME button for 2 seconds will
toggle the clock between "RDS CLK" and "HOME CLK".
The display will indicate which clock is activated. The
"RDS CLK" is only updated by the signal transmitted
from a radio station with an RDS signal.
Advertisement
Chapters
Table of Contents
