Hyundai 2005 Santa Fe Owner's Manual page 104

HEATING AND VENTILATION
B670A03O-AAT
(If installed)
1 2
3 4
There are three controls and two switches for
the heating and cooling system. They are:
1. Air intake control switch
2. Air conditioning switch
3. Air flow control
4. Fan speed control
5. Temperature control
B670B02O-AAT
Fan Speed Control (Blower Control)
5
B690A01O-1
This is used to select the blower fan speed.
The blower fan speed, and therefore the volume
of air delivered from the system, may be con-
trolled manually by setting the blower control
between the "1" and "4" position.
1 being the lowest fan speed and 4 being the
highest fan speed.
B670C02O-AAT
Air Intake Control Switch
B670B01O-1
This is used to select fresh outside air or
recirculate inside air.
To change the air intake control mode, (Fresh
mode, Recirculation mode) push the control
button.
FRESH MODE (
the button is illuminated when the air intake
control is in fresh mode.
RECIRCULATION MODE (
light on the button is illuminated when the air
intake control is in recirculation mode.
1
FEATURES OF YOUR HYUNDAI
93
B670C02O
) : The indicator light on
) : The indicator