Seat; Securing The Child Restraint Seat With The "Isofix" System - Hyundai 2005 Accent Owner's Manual

Covering Shelf
Tether Strap Hook
Back Panel
Front of Vehicle
2. Remove the blanking covers on the cover-
ing shelf.
3. Connect the tether strap hook to the child
restraint hook holder through the hole on
the covering shelf and tighten to secure the

seat.

!
WARNING:
Do not mount more than one child restraint
to a single tether or to a child restraint lower
anchorage point. The improper increased
load may cause the anchorage points or
tether anchor to break, causing serious
injury or death.
B230E03A-1
FEATURES OF YOUR HYUNDAI
B230D04E-AAT
Securing the Child Restraint Seat with
the "ISOFIX" System
Some child seat manufacturers make safety
seats that are labeled as ISOFIX or ISOFIX-
compatible child seats. These seats include two
rigid or webbing mounted attachments that con-
nect to two ISOFIX anchors at specific seating
positions in your vehicle. This type of child seat
eliminates the need to use seat belts to attach
the child seat for forward-facing child seats.
ISOFIX anchors have been provided in your
vehicle. The ISOFIX anchors are located in the
left and right outboard rear seating positions.
Their locations are shown in the illustration.
There is no ISOFIX anchor provided for the
center rear seating position.
1
25
B230D01A