Advertisement
SCAN TO LEARN
https://hyundaihowtos.com
Scan to learn more about new and existing features on your Hyundai with "How-To" guides:
NOTE: Use this Quick Reference Guide to learn about the features that will enhance your enjoyment of your Hyundai. More detailed information about these features are available in your Owner's Manual.
Door Lock
Door Unlock
Remote Start
Panic
Tailgate Open
Press and hold the Door Unlock button on the smart key for more than 3 seconds and the windows move down after the doors are unlocked.
Window movement stops when you release the door unlock button.
NOTE: The remote window opening feature operates only with the Safety Power Windows equipped.
Physical
Smart key
Digital key
Smart device
Digital key
Hyundai Card
Emergency
Mechanical key
If the smart key does not operate normally, you can lock or unlock the driver's door by using the mechanical key.
Digital Key provides many of the same functions as physical Smart Key:
LOCK / UNLOCK
vehicle doors
OPEN / CLOSE
the liftgate
TURN ON
your Hyundai
To pair your smartphone, complete the following steps:
How to register your Hyundai Card Key (NFC key)
HYUNDAI Digital Key may not operate if any of the following occurs:
The vehicle may not be controlled by the smartphone if any of the following occurs:
To lock / unlock your vehicle using the paired Digital Key device , hold 1 the key card up to the center of the door handle
Digital key
Hyundai Key Card
Digital key
Smart Phone
Digital key
Smart Device
If you UNLOCK the doors using the Driver Side Door Handle, either the driver's side door is unlocked or all the doors are unlocked depending on the setting for the Two Press Unlock feature.
Disable/Enable 2 Press Unlock Function: In the infotainment screen press Setup button > Vehicle > Door > Toggle ON/OFF 2 Press Unlock.
If you unlock the doors using the passenger side door handle, all the doors are unlocked always.
With the ignition OFF and foot OFF of the brake pedal, press the Engine Start / Stop button:
Smart Key
Smart Phone App
This feature enables you to remotely start your vehicle from virtually anywhere. You can also set the ACC temperature, activate heated / ventilated seats (if equipped) and turn on the front window defroster, ensuring a warm or cool car is ready to go when you are.
To use this feature, you must have a Bluelink Personal Identification Number (PIN). To create or change your PIN, log on to www.MyHyundai.com. Refer to Bluelink User's Manual for more information.
SETTING UP YOUR BLUELINK ACCOUNT
To start the engine in any mode ACC/ON/OFF:
Smart Key
To start the engine, you must have Smart Key in your possession. You can leave your smart key in your pocket or purse when you start your vehicle.
Digital Key - Smartphone
You can start the engine, if you have placed your paired Smart Phone with set up Hyundai Digital key on Authentication Pad / Wireless Power Charger
.
Digital Key - Hyundai Card Key
You can start the engine, if you have placed your paired Hyundai Card Key on Authentication Pad
.
Fingerprint Authentication
You can start the engine, if you have registered your fingerprint in the User profile and previously verified your fingerprint by placing your finger on fingerprint sensor.
NOTE: If you overlap and use the key card with other NFC-enabled cards such as a transportation card or credit card, it will not work. For security reasons, the vehicle can only have one NFC key card paired to it at one time. Any time that a new NFC key card is paired to the car it will disable the previously paired NFC key card.
To shut the engine OFF:
Shutting Off the Engine while Driving
Restarting the Engine while Driving
If the vehicle is still moving, you can restart the vehicle without depressing the brake pedal by pressing the Engine Start/Stop button with the gear in the N (Neutral) position.
When Smart Key is not working properly
If the smart key battery is weak or the smart key does not work correctly, press the Engine Start/Stop button with the smart key.
NOTE: The fuel filler door will lock when all doors are locked.
Close the Tonneau cover and rotate the yellow cap
at the bottom counter clockwise to lock
. Rotate the yellow cap
at the bottom counter clockwise to unlock
.
NOTE: Locking and unlocking the tonneau cover is only possible with liftgate open.
Make sure the vehicle is in P (Park) and set the parking brake. Then do one of the following:
Close the tailgate by lifting upward and ensure that both latches are properly engaged. This can be checked by pulling back on the gate.
NOTE: Ensure that both cables
are properly connected and secured before using the liftgate or applying any load on it.
Use the rear bumper steps shown for easier access to the pickup bed. To prevent damage to the rear bumper steps:
Do not allow others to step or ride on the rear bumper while vehicle is in motion.
Folding the rear seat:
Unfolding the rear seat:
Fingerprint authentication system provides convenient features
A fingerprint must be registered in the User Profile settings from the infotainment system to use the system. The maximum of two fingerprints can be registered. Driver 1 and Driver 2 can register one fingerprint each.
Fingerprint linked features can be turned ON or OFF from the Settings menu. Press the SETUP button, and then select: User Profile > Driver 1 > Fingerprint Identification.
Each time you touch the button, the setting is changed as follows:
Each time you touch the button, the setting is changed as follows:
Use with A/C 5 on and Bi-Level mode 6
for effective ventilation.
Lock
Insert the mechanical key into the hole
and turn it counter-clockwise to the lock
position.
Unlock
Insert the mechanical key into the hole
and turn clockwise to the unlock
position.
If your vehicle is equipped with a sunroof, you can slide or tilt your sunroof with the sunroof switch located on the overhead console. The sunroof can only be operated when the ignition switch is in the ON or START position.
To open the sunshade, pull the sunroof control switch rearward to the first detent position. To close the sunshade when the sunroof glass is closed, push the sunroof control switch forward
to the first detent position.
Pull the sunroof control switch rearward to the second detent position .
First the sunshade will open and then the sunroof will open automatically.
Push the sunroof control switch forward to the first detent position to close the sunroof. Push the sunroof control switch to the second detent position
to close both the sunroof and the sunshade automatically.
Open
Push the sunroof control switch upward to tilt the sunroof.
Close
Push it upward again to close the sunroof. You can also push the sunroof control switch forward to close the sunroof. Push it forward to the second detent position
to close the sunroof and the sunshade.
Push the switch to turn the map lamp and room lamp
on or off. When the Master Switch pushed
, the other switches
,
not operate.
When the Door Mode Switch is pushed, map lamp
and room
lamp turn ON if any door is opened and will turn OFF after all doors are closed.
Press the left lens for driver's side or right lens
for passenger's side to turn ON and OFF for each side of map lamp.
Press the switch to turn ON and OFF the room lamp.
When this switch is pushed, master switch cannot control room lamp
The interior lamps will automatically go off approximately 10 minutes after the vehicle is turned off and the doors are closed. If a door is opened, the lamp will go off 40 minutes after the vehicle is turned off. If the doors are locked by the smart key and the vehicle enters the armed stage of the theft alarm system, the lamps will go off five seconds later.
Do not use the interior lights when driving in the dark. The interior lights may obscure your view and cause an accident.
You can enable the headlight delay function from the Settings menu in the infotainment system. Press the SETUP button, and then select Vehicle > Lights > Headlight Delay.
If you place the Engine Start/Stop button to the ACC or OFF position with the headlights ON, the headlights (and/or parking lights) remain ON for about 5 minutes. If the driver's door is opened and closed, the headlights are turned off after 15 seconds.
The headlights (and/or parking lights) can be turned off by pressing the lock button on the smart key twice or turning the headlight switch to the OFF or AUTO position.
To flash the high beam headlight:
The high beam remains ON as long as you hold the lever.
To turn high beam ON, push the lever away from you.
To turn high beam OFF, pull the lever towards you.
High Beam Assist automatically adjusts the headlights between high beam and low beam depending on the light detected from oncoming vehicles or vehicles in front using the front view camera.
With the Engine Start/Stop button in the ON position, press Setup button and select Vehicle > Lights > High Beam Assist from the Settings menu to enable High Beam Assist (or deselect to disable the function).
To use One Touch Turn Signal, push the turn signal lever up or down to position and then release it. The lane change signals blinks 3, 5 or 7 times.
You can enable the One Touch Turn Signal function or choose the number of blinking from the Settings menu in the infotainment system. Press the SETUP button, and then select Vehicle > Lights > One Touch Turn Signal > Off/3 flashes/5 flashes/7 flashes.
Fastest wiper speed
Move the control switch.
Slowest wiper speed
Pull the lever gently toward you to spray washer fluid on the windshield and to run the wipers 1 - 3 cycles.
The spray and wiper operation continues until you release the lever. If the washer does not work, you may need to add washer fluid to the washer fluid reservoir.
The rear wiper operates while the vehicle is in REVERSE (R) with the front wiper ON. You can select the function from the settings menu in the infotainment system.
Press the SETUP button, and then select Vehicle > Convenience > Auto Rear Wiper (in R).
MODE button for changing modes
MOVE switch for changing items
SELECT/RESET button for setting or resetting the selected item
MSLA/LKA/SCC/LFA/HDA
Displays the state and the current operation condition of Manual Speed Limit Assist, Lane Keeping Assist, Smart Cruise Control, Lane Following Assist, Highway Driving Assist (if equipped).
Displays TURN-BY-TURN navigation and distance / time to destination appear.
Displays the service interval and warning messages.
Select options for settings:
When the vehicle's parking lights or headlights are on, press the illumination control switch + or - to adjust the brightness of the instrument panel illumination. The interior intensity is also adjusted.
Pressing the OFF button will place the system in the OFF mode:
NOTE: To reduce tendency of the glass fogging and also to improve visibility, keep the interior surface of the windshield clean by wiping it with a clean cloth and glass cleaner. In addition, select air intake control to the outside (fresh) air position whenever possible while operating the vehicle.
Press the AUTO button. The modes, fan speeds, air intake, and air conditioning are controlled automatically by the temperature setting. Turn the temperature control knob left or right to set the desired temperature.
You can control the fan speed in three stages by pressing the AUTO button during automatic operation.
HIGH: Provides rapid air conditioning and heating with the maximum fan speed setting.
MEDIUM: Provides air conditioning and heating with the mid-level fan speed setting.
LOW: Fan speed is set to the lowest setting range.
NOTE: If the temperature is set to either HI or LO, the fan speed setting will be HIGH. For detailed precautions and instructions, see the Owner's Manual.
Air intake control
Mode selection
The MODE selection button
controls the direction of the air flow through the ventilation system as follow:
Adjusting the temperature equally
the SYNC button (indicator light ON) to adjust the driver and passenger side temperature equally.
Adjusting the temperature individually
Press the SYNC button (indicator light OFF) again to adjust the driver and passenger side temperature individually.
There is a wireless smartphone charging system inside the front console. The system will operate when all doors are closed, and the ignition switch is in the ON position.
Turn on the wireless charging function from the Settings menu in the infotainment system. Press the SETUP button, and then select Vehicle > Convenience > Wireless Charging System for Mobile Devices.
Place the smartphone on the center of the wireless charging pad. The indicator light is ORANGE when the smartphone is charging and turns BLUE when phone charging is complete.
NOTE: Wireless charging pad will stop working when the driver's door is open. When the door is closed, the wireless charging pad will resume charging your phone again. NOTE: 15W Wireless Power Charger.
NOTE: The wireless cellular phone charging system supports only the Qienabled cellular phones
. NOTE: Do not place any metallic items such as coins, keys on the charger. Avoid putting credit cards, etc. on the charger as they might get damaged by the magnetic field.
The left side USB data port can toggle between charging or data connection while charging. Press button top part
for charging only. Press button bottom
to listen to music or connect to Android Auto / Apple CarPlay. The right side USB port
is for charging only.
Each front seat is equipped with one USB port for charging only located on side of the seat toward to 2nd row seat passengers.
for Android Auto
for Apple CarPlay
Pairing tutorials, phone compatibility and operational tips can be found through the Smart QR code using the QR reader application on your Smartphone
Ensure Bluetooth device volume is set to 100% for optimal audio quality. To adjust volume to your preference, utilize the head unit knob or steering wheel control. When placing a call, reduce the volume of the head unit if distortion or echoing is present. In the following situations you or the other party may have difficulty hearing each other:
NOTE:
For more information on how to operate Android Auto, please refer to your display audio or navigation manual. For additional Android Auto support, please refer to the Android Auto support website https://support.google.com/androidauto/.
ANDROID AUTO™ SUPPORT
Scan to learn more about new and existing features on your Hyundai with "How-To" guides.
Android Auto, Google Play, Android, and other marks are trademarks of Google Inc.
APPLE CARPLAY® SUPPORT
Scan to learn more about new and existing features on your Hyundai with "How-To" guides.
Apple CarPlay, Apple, and other marks are trademarks of Apple Inc.
VOICE RECOGNITION (VR) BUTTON
Activates voice recognition of a connected smartphone:
CALL/ANSWER/CALL END
Answer a call or end a call. Press and hold to reject an incoming call.
CUSTOM
Use a custom function. Press and hold to access the Custom Button settings screen. Tap to select the programmed function.
The menu tree identifies available voice recognition Bluetooth® functions.
CALLING BY NAME:
DIALING BY NUMBER:
Your vehicle is equipped with a Voice Recognition technology which allows drivers to operate their phones without having to take their eyes off of the road to minimize distractions.
Voice recognition performance may be affected if driving with windows and sunroof open; when the heating-cooling system is on; when passing in a tunnel or when driving on rugged and uneven roads.
Quick reference on using system voice commands on navigation equipped vehicles. Smartphone commands are similar. To start a voice command, press the button, the following commands are available:
Command | Function |
More Help | Provides guidance on commands that can be used anywhere in the system. |
Help | Provides guidance on commands that can be used within the current mode. |
Calls <Name> | Calls <Name> saved in Contacts. Ex) Call "John" |
Dial <Number> | Call can be made by dialing the spoken numbers. Ex) Call "123" |
Phone | Provides guidance on Phone related commands. After saying this command, say "Call History", "Contacts" to execute the corresponding functions. |
Contact s (Call by Name) | Displays the Contacts screen. After saying this command, say the name of a contact saved in the Contacts to automatically connect a call. |
Dial Number | Displays the Dial number screen. After saying this command, you can say the number which you want to call. |
For the complete list of commands, please refer to your Owner's Manual.
NOTE: An active Bluelink subscription is required for most system Voice Recognition (VR) commands. Phone based VR commends (Long press of the VR button) are through your phone.
NOTE: Vehicles without Navigation require a compatible Apple or Android phone connected to the USB port to use the Voice Recognition button on the steering wheel. If connected via Bluetooth you cannot place a call using VR, you can only accept and end a call.
Press POWER button to turn radio ON.
On the Media Home screen , press and hold any star icon button
until an audible beep is heard to store current channel. Radio channels are saved to Favorites screen. To display Favorites screen, on Media home screen
, select Favorites
.
The sound settings for various system and phone levels can be adjusted. To configure sound settings, press Setup > Sound, and the Sound Settings screen will appear. Configure the settings as needed.
NOTE: For more information on specific setting, refer to Online Manual.
On the control panel, press SETUP button and select Sound > Position. Touch on-screen arrows to adjust desired setting.
NOTE: Users can set the volume level of each source (FM, AM, SXM®, USB, BT and etc.) individually by adjusting the knob
. When the volume of a source is adjusted to the desired level, it will be automatically saved at that setting. Thus, when the user changes source and reverts back, the volume will be set at the last desired level.
VOLUME: Raises or lowers the speaker volume. Press to Mute.
SEEK/PRESET: Changes the station. Fast forward / rewind smartphone media (as set in the app).
MODE: Changes the audio source. Holding MODE button until it beeps allows you to customize which features to attach to MODE.
MUTE: Press the volume control to MUTE. Press the volume control again to UNMUTE.
To continue listening to your desired media source (FM, AM, SXM, etc.) while operating Android Auto™ or Apple CarPlay®:
Basic features on the map screen
Enter POI, address via keyboard (vehicle in Park (P)) or Voice.
You can search by Previous Destinations here.
You can search by Nearby Points of Interests (POIs).
You can store saved addresses (Home, Work, and other POIs here.
Lane Keeping Assist is designed to help detect lane markings or road edges when the vehicle speed is above 40 mph and the LKA indicator is green displayed in the instrument cluster. LKA will not operate properly if the lane line is not clear, sharp bend in the road, or in heavy fog. The system will warn the driver if the vehicle leaves the lane without using the turn signal.
With the engine on, press the SETUP button, and then select Vehicle > Driver Assistance > Driving Safety > Lane Safety in the infotainment system. If Lane Safety is selected, LKA automatically assists the driver's steering when lane departure is detected to help prevent the vehicle from moving out of its lane.
To turn function ON, press and hold the Lane Driving Assist button for about 2 seconds located on the steering wheel. The
indicator light will illuminate on the cluster. Press and hold the button again to turn OFF the system. Refer to the Owner's Manual for more detailed information.
Lane Following Assist helps detects lane markings and/or a vehicle ahead on the road, and helps center your vehicle in the lane. LFA helps to assist the driver steering to help keep the vehicle centered in the lane.
To enable LFA while driving, press and release the Lane Driving Assist button on the steering wheel.
When LFA is activated, the indicator on the cluster will illuminate. The color of the indicator will change depending on the condition of LFA.
Forward Collision-Avoidance Assist helps detect a vehicle, a pedestrian, or a cyclist ahead on the road. The function may warn you with a warning message and an audible warning if a collision is imminent. If necessary, it may assist with braking your vehicle to help reduce collision speed and avoid a collision.
With the engine on, press the SETUP button, select Vehicle > Driver Assistance > Driving Safety to set whether to use each function.
If "Forward Safety" is deselected, Forward Safety will turn off. The warning light will illuminate on the cluster.
NOTE: Please refer to your Owner's Manual for further information.
Blind-Spot Collision-Avoidance Assist helps detect approaching vehicles in the driver's blind spot areas and warn you of a possible collision with a warning light and a warning sound.
With the engine on, press Setup button, select Vehicle > Driver Assistance > Driving Safety > Blind Spot Safety. If Blind-Spot Safety is selected, BCA Assist warns the driver with a warning message, an audible warning depending on the collision risk levels. Braking assist is applied for parking exit depending on the collision risk levels.
If the vehicle is turned on, when "Blind-Spot Safety" is selected, the warning light on the side view mirror blinks for three seconds.
The Warning Methods can be set from the infotainment system, select Setup > Vehicle > Driver Assistance > Warning Method:
The Warning Volume and Haptic Warning cannot be turned off at the same time. When one of the warning is turned off the other is activated.
The drive mode may be selected according to the driver's preference or road conditions. The system resets to ECO MODE, when the engine is restarted.
Whenever the DRIVE MODE switch is pushed UP or DOWN the mode changes, as the following:
*if equipped
ECO mode helps improve fuel economy for eco-friendly driving. Fuel economy varies according to the driver's driving habit and road condition.
The above situations are normal conditions when ECO mode is activated to help improve fuel economy.
The engine and transmission control logic work together to provide regular daily driving performance with fuel efficiency.
Manages the driving dynamics by automatically adjusting the steering effort, and the engine / transmission control logic for enhanced driving performance. The engine RPM will be a little higher than normal.
Selects the proper driving mode among SMART NORMAL / SMART SPORT by judging the driver's driving habits (i.e., mild or dynamic) from the brake pedal depression or the steering wheel operation. In MY DRIVE MODE, you can adjust the vehicle performance for each function. To set MY DRIVE MODE, press the SETUP button, and then select Vehicle > Drive Mode > MY DRIVE MODE in the infotainment system.
Offers special traction tuning for snow optimizing available traction in adverse conditions. Adjusts the left and right wheel slip control, engine torque, and shift patterns according to available traction levels.
Inattentive driving warning
Driver Attention Warning monitors your driving pattern while driving. When the driver's attention level is below a certain level, Driver Attention Warning recommends a break to help with safe driving.
Leading vehicle departure alert function
Leading Vehicle Departure Alert function will inform the driver when a detected vehicle in front departs.
Leading vehicle departure alert
With the engine on, select Setup > Vehicle > Driver Assistance > Driver Attention Warning > enable Leading Vehicle Departure alert in the infotainment system to set whether to use function.
If Leading Vehicle Departure Alert is selected, the function will inform the driver when a detected vehicle in front departs from a stop.
Smart Cruise Control helps maintain a set distance and speed from the vehicle ahead.
With the engine on, press the SETUP button and then select Vehicle > Driver Assistance > Driving Convenience > Smart Cruise Control is selected from the infotainment system, you can change the vehicle distance, the acceleration, and the reaction speed manually.
Press the Driving Assist button to turn on Smart Cruise Control. The speed will be set to the current speed on the instrument cluster.
Toggle switch + UP to Set / Increase the cruise control speed. Toggle switch - DOWN
to Set / 31 Decrease the cruise control speed.
Press the Vehicle distance button to Set and Maintain the vehicle distance without pressing the accelerator or brake pedal.
Each time the button is pressed, the vehicle distance changes as follows:
Selected distance level
Set speed
Whether there is a vehicle ahead and the target vehicle distance
Press the button or depress the brake pedal.
To resume Smart Cruise Control after the function was temporarily canceled, operate the +, - or a switch.
NOTE: Standard Cruise Control (CC) Operation is similar but will not adjust the vehicle speed. Refer to your Owner's Manual for CC operation.
The EPB will automatically be applied when: depressing the brake pedal, engine off while Auto Hold is enabled, parked on a slope, or with the engine off in P (park) but the vehicle still moves a bit.
With the engine running, depress the brake pedal and shift out of P (Park) or N (Neutral) to R (Reverse) or D (Drive). Make sure the doors, hood, and trunk are closed and the seat belt is fastened.
If there is a problem with the brake pedal while driving, emergency braking is possible by pulling up and holding the EPB switch. Braking is possible only while you are holding the EPB switch. However, braking distance may be longer than normal.
NOTE: Please see the owner's manual for additional details.
The Auto Hold feature assists in steep hill areas. It holds the brake until the accelerator pedal is pressed. Auto Hold maintains the vehicle in a standstill even though the brake pedal is not depressed after driver brings the vehicle to a complete stop by depressing the brake pedal.
To cancel the AUTO HOLD operation, press the AUTO HOLD switch again.
The automatic transmission has eight forward speeds and one reverse speed.
The individual speeds are selected automatically in the D (Drive) position.
Rear Occupant Alert is provided to help prevent the driver from leaving with any rear passenger left in the vehicle.
To use Rear Occupant Alert, it can be enabled from the Settings menu in the infotainment system. Select: Setup > Vehicle > Convenience > Rear Occupant Alert
When you turn off the engine and open the driver's door after opening and closing the rear door, the "Check rear seats" warning message appears on the cluster display.
To turn the warning message off, press the OK button.
NOTE: The record of the rear door opening and closing resets only when the driver turns the vehicle off and locks the vehicle door. Even if the rear door has not been reopened, an alert may occur if the door record is not reset. For example, if the driver opens the door and exits the vehicle again without locking the door after the Rear Occupant Alert operates, the alert may occur again.
NOTE: The infotainment system may change after software updates. For more information, refer to the manual provided in the infotainment system and the quick reference guide.
Always check the rear seats before you leave the vehicle.
The Rear Occupant Alert system does not actually detect the presence of objects or occupants in the rear seat but just informs you to check the rear seat by using the record of the rear door opening and closing.
Front view camera
Wide-front view camera
Wide-side view camera
Wide-rear view camera
In-cabin camera
Front ultrasonic sensors
Front side ultrasonic sensors
Rear ultrasonic sensors
Rear side ultrasonic sensors
Front radar
Rear corner radar
The Driver Assistance system on your vehicle uses cameras and sensors to help detect potential hazards in the vicinity of your vehicle.
Scan the QR code to view more
FORWARD ATTENTION WARNING
WATCH & LEARN
*1 Requires <API SN PLUS(or above) Full synthetic> grade engine oil. if a lower grade engine oil(mineral oil including Semisynthetic) is used, then the engine oil and engine oil filter must be replaced as indicated severe maintenance condition.
*2 The drive belt should be replaced when cracks occur or tension is reduced excessively.
*3 If TOP TIER Detergent Gasoline is not available, one bottle of additive is recommended. Additives are available from your authorized HYUNDAI dealer along with information on how to use them. Do not mix other additives.
*4 Never add any additives to the engine oil. Engine oil additives can change the properties of engine oil and may cause serious engine failure.
*5 For your convenience, it can be replaced prior to its interval when you do maintenance of other items.
*See Owner's Manual for details regarding Severe Usage maintenance recommendations.
Looking for more detailed information? This Quick Reference Guide does not replace your vehicle's Owner's Manual. If you require additional information or are unsure of a specific issue, you should always refer to the vehicle's Owner's Manual or contact your authorized Hyundai dealer. The information contained in this Quick Reference Guide was correct at the time of printing; however, specifications and equipment can change without notice. No warranty or guarantee is being extended in this Quick Reference Guide, and Hyundai reserves the right to change product specifications and equipment at any time without incurring obligations. Some vehicles are shown with optional equipment. Specifications apply to U.S. vehicles only. Please contact your Hyundai dealer for current vehicle specifications.
Roadside Assistance: 1-800-243-7766
Consumer Affairs: 1-800-633-5151
SiriusXM® Radio: 1-800-967-2346
Bluelink® :
1-855-2BLUELINK
1-855-225-8354
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the SANTA CRUZ 2025 and is the answer not in the manual?
Questions and answers