Turn Signals And Headlights - Honda 2010 CR-V Owner's Manual

09/07/16 17:57:47 31SWA630_082
Turn Signal Push down on the
−
lever to signal a left turn and up to
signal a right turn. To signal a lane
change, push lightly on the lever,
and hold it. The lever will return to
center when you release it or
complete a turn.
Turning the switch to
Headlights −
the '' '' position turns on the
parking lights, taillights, instrument
panel lights, side-marker lights, and
rear license plate light.
Turning the switch to the ''
position turns on the headlights. If
you leave the lights on with the key
removed from the ignition switch,
you will hear a reminder chime when
you open the driver's door.
When the light switch is in either of
these positions, the lights on
indicator comes on as a reminder.
This indicator stays on if you leave
the lights on and turn the ignition
switch to the ACCESSORY (I) or
LOCK (0) position.
Push the lever
High Beams −
forward and the high beam indicator
will come on (see page
back to return to low beams.
'' To flash the high beams, pull the
lever back lightly, then release it.
The high beams will stay on as long
as you hold the lever back.

Turn Signals and Headlights

EX-L models only
AUTO The automatic lighting
−
feature turns on the headlights and
all other exterior lights, when it
senses low ambient light.
To turn on automatic lighting, turn
the light switch to AUTO. The lights
will come on automatically when the
outside light level becomes low (at
dusk, for example). The lights on
65 ). Pull it indicator comes on as a reminder.
The lights and indicator will turn off
automatically when the system
senses high ambient light.
The lights will remain on when you
turn off the ignition switch. They will
turn off automatically when you
remove the key and open the driver's
door. To turn them on again, either
turn the ignition switch to the ON
(II) position or turn the light switch
to the position.
CONTINUED
77