Security System - Honda 2010 CR-V Owner's Manual

Unlinked
Hide thumbs Also See for 2010 CR-V:
Table of Contents

Advertisement

09/07/16 18:29:56 31SWA630_269

Security System

If equipped
The security system helps to protect
your vehicle and valuables from theft.
The horn sounds and a combination
of headlights, parking lights, side
marker lights and taillights flash if
someone attempts to break into your
vehicle or remove the audio unit.
This alarm continues for 2 minutes,
then the system resets. To reset an
activated system before the 2
minutes have elapsed, unlock the
driver's door with the key or use the
remote transmitter.
The security system automatically
sets 15 seconds after you lock the
doors, hood, and the tailgate. For the
system to activate, you must lock the
doors and the tailgate from the
outside with the key, driver's lock
tab, door lock master switch, or
remote transmitter. The security
system indicator on the instrument
panel starts blinking immediately to
show you the system is setting itself.
264
SECURITY SYSTEM INDICATOR
Once the security system is set,
opening any door without using the
key or the remote transmitter, the
hood, or the tailgate will cause the
system to alarm.
The security system will not set if
the hood, tailgate, or any of the
doors are not fully closed. If the
system will not set, check the doors
and the tailgate. You can also check
the open indicator on the instrument
panel (see page
65
), to see if the
doors and the tailgate are fully
closed. Since it is not part of the
monitor display, manually check the
hood.
NOTE:
Use the remote transmitter
to quickly check that the hood, the
tailgate, and all doors are closed.
Push the lock button twice within 5
seconds. There should be an audible
confirmation beep.
Do not attempt to alter this system
or add other devices to it.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cr-v 2010

Table of Contents