Honda 2010 CR-V Owner's Manual page 404

09/07/16 18:54:36 31SWA630_403
Fuses
Checking and Replacing Fuses
If something electrical in your
vehicle stops working, check for a
blown fuse first. Determine from the
chart on pages 401 and
diagram on the fuse box lid, which
fuse or fuses control that device.
Check those fuses first, but check all
the fuses before deciding that a
blown fuse is the cause. Replace any
blown fuses, and check if the device
works.
398
1. Turn the ignition switch to the
LOCK (0) position. Make sure the
headlights and all other
accessories are off.
402 , or the
2. Remove the cover from the fuse
box.
FUSE BLOWN
3. Check each of the large fuses in
the under-hood fuse box by
looking through the side window
at the wire inside. Removing these
fuses requires a Phillips-head
screwdriver.