Honda 2010 CR-V Owner's Manual page 349

09/07/16 18:45:03 31SWA630_348
The maintenance item code or codes
indicate the main and sub items
required at the time of the oil change
(see page 347 ).
You can switch the information
display from the engine oil life
display to the odometer or the
average fuel mileage, press and
release the select/reset knob on the
instrument panel.
When the engine oil life is 15 to 1
percent, the maintenance minder
indicator ( ) comes on every
time you turn the ignition switch to
the ON (II) position, then it goes out
if you switch the information display.
When you see this message, have
the indicated maintenance
performed by your dealer as soon as
possible.
When the remaining engine oil life is
0 percent, the engine oil life indicator
will blink. The display comes on
every time you turn the ignition
switch to the ON (II) position. The
maintenance minder indicator
( ) also comes on and remains
on in the instrument panel. When
you see this message, immediately
have the indicated maintenance done
by your dealer.
Maintenance Minder
NEGATIVE DISTANCE TRAVELED
If you do not perform the indicated
maintenance, negative distance
traveled is displayed and begins to
blink after the vehicle has been
driven 10 miles (10 km) or more.
Negative distance traveled means
your vehicle has passed the
maintenance required point.
Immediately have the indicated
maintenance done by your dealer.
CONTINUED
343