Table of Contents
Advertisement
Main Menu
Setting Up the System
You can select or change some
settings for the HFL system. Here
are the settings you can select or
change. To do this, make sure your
vehicle is parked safely, with your
phone on and the ignition switch in
the ACCESSORY (I) or ON (II)
position.
Setting a security passcode
You can set a four-digit security
passcode to lock the HFL system
for security purposes.
If you forget your passcode, you
cannot activate HFL. Consult your
dealer to cancel the passcode.
You can also select a ''System
Clear'' command to reset HFL
(see page
358
).
Changing a security passcode
You can change the security
passcode.
Table Of Contents
Selecting the incoming
notification
The incoming notification can be
set to a ring tone, a prompt, or no
notification. The default setting is
a prompt.
To set a security passcode, do this:
1.
Press and release the Talk button.
After the beep, say ''System setup.''
HFL responds ''System setup
options are security, change
passcode, call notification, auto
transfer, and clear. Press the Talk
button and say a command.''
2.
Press and release the Talk button.
After the beep, say ''Security.''
HFL responds ''Security is
disabled. Would you like to enable
security? Press the Talk button
and say Yes or No.''
2009 Odyssey
Bluetooth HandsFreeLink
Press and release the Talk button.
3.
After the beep, say ''Yes.''
HFL responds ''What is the four-
digit number you would like to set
as your security passcode? Press
the Talk button and say the
number.''
If you say ''No,'' HFL returns to
idle.
4.
Press and release the Talk button.
After the beep, say the four-digit
passcode you want to use. For
example, say ''1, 2, 3, 4.''
HFL responds ''1, 2, 3, 4. Is this
correct? Press the Talk button and
say Yes or No.''
CONTINUED
337
Advertisement
Table of Contents
