Table of Contents
Advertisement
Main Menu
Doing any of the following after
pressing the MEMO button will
cancel the storing procedure.
Not press a memory button within
5 seconds.
Pressing the MEMO button again
within 5 seconds.
Readjust the seat position.
Readjusting the outside mirror
position.
Each memory button stores only one
driving position. Storing a new
position erases the previous setting
stored in that button's memory. If
you want to add a new position while
retaining the current one, use the
other memory button.
All stored driving positions will be
lost if your vehicle's battery goes
dead or is disconnected.
Table Of Contents
Selecting a Memorized Position
MEMORY BUTTONS
To select a memorized position, do
this:
1.
Make sure the shift lever is in the
Park (P) position.
2.
Press the desired memory button
(1 or 2) until you hear a beep.
The system will move the seat and
outside mirrors to the memorized
positions. The indicator in the
2009 Odyssey
Driving Position Memory System
selected memory button will flash
during movement. When the
adjustments are complete, you will
hear two beeps, and the indicator will
remain on.
To stop the system's automatic
adjustment, do any of these actions:
Press any button on the driver's
door: MEMO, memory button 1 or
2.
Push any of the adjustment
switches for the seat.
Shift out of Park.
Adjust the outside mirrors.
If desired, you can use the
adjustment switches to change the
positions of the seat or outside
mirrors after they are in their
memorized positions. If you change
the memorized position, the
indicator in the memory button will
go out. To keep this driving position
for later use, you must store it in the
driving position memory.
185
Advertisement
Table of Contents
