Appearance; Button; Interface; Preparation - ATN OTS-XLT 160 2-8x Manual

Image Correction
The device supports DPC (Defective Pixel Correction) and FFC/NUC (Flat
Field Correction)/(Non Uniform Correction) which can optimize the image
quality.
Storage
The built-in memory module supports video recording and snapshot cap-
turing.

3.3. APPEARANCE

3.3.1. Button

POWER
CAPTURE
Buttons on the Device
Button Functions
Icon Button
Press: standby mode/wake up device
Power
Hold: power on/off
Press: capture image
Capture
Hold: recording video
Press: color palettes
Mode
Hold: menu
Press: digital zoom
Zoom
Hold: FFC/NUC
6
MODE
ZOOM
Function

3.3.2. Interface

DIOPTER ADJUSTMENT KNOB
TRIPOD SCREW
CABLE INTERFACE
Overview of Interfaces
• Diopter Adjustment Knob: adjust the view of the display for your vision.
• Cable Interface: charge the device or export files with the supplied cable.
• Tripod Screw: connect to tripod.
4 . P R E PA R AT I O N
Take out the device and accessories. Check them with the packaging list to
confirm device and accessories are included and available for use. Read the
user manual to learn the usage methods and cautions.

4.1. CHARGE DEVICE

After the device starts up, the OSD (on-screen display) shows the battery
status. When the battery is low, charge the device and ensure it works properly.
Before You Start
• The charging temperature should be from 0°C to 45°C (32°F to 113°F).
• Charge the device with the delivered cable.
Steps
1. Lift the cable interface cover.
2. Plug in the cable and charge the device.
EYEPIECE
7