Table of Contents
Advertisement
Maintenance Schedule
Engine Oil (Check)
Engine Oil (Change)
Air Cleaner (Check)
Air Cleaner Wash
Fuel Filter Cap (Clean)
Spark Plug (Clean)
Spark Plug (Change)
Check Chipper Blade
Fuel Tank and Filter
(Clean)
Always stop engine, disconnect spark plug and ground against engine before cleaning, lubricating or
doing any kind of maintenance on your machine.
Maintenance and Storage
1. NEVER tamper with safety devices. Check their proper operation regularly.
2. Check bolts and screws for proper tightness at frequent intervals to keep the machine in safe working
condition. Also, visually inspect machine for any damage and repair, if needed.
3. Before cleaning, repairing or inspecting, stop the engine and make certain the impeller and all moving
parts have stopped. Disconnect the spark plug wire and ground it against the engine to prevent unintended
starting.
4. Maintain or replace safety and instruction labels as necessary.
5. Follow this manual for safe loading, unloading, transporting, and storage of this machine.
6. NEVER store the machine or fuel container inside where there is an open flame, spark or pilot light such as a
water heater, furnace, clothes dryer, etc.
7.
Always refer to the owner's manual for proper instructions on off-season storage.
8. If the fuel tank has to be drained, do this outdoors.
9. Observe proper disposal laws and regulations for petrol, oil, etc. to protect the environment.
Always stop engine, disconnect spark plug and ground against engine before cleaning, lubricating or
doing any kind of maintenance on your machine.
BBT-CH-15
MAINTENANCE AND STORAGE
Before each use
20hrs or
every 3 months
X
X
50hrs or
every 3 months
X
X
100hrs or
300hrs or
every 6 months
every 1 years
X
X
X
X
X
WWW.BBTA.COM.AU
13
Advertisement
Table of Contents
