Storing The Tire Sealant; And Compressor Kit; Tire Changing - Chevrolet 2010 Camaro Owner's Manual

Removal and Installation of
the Sealant Canister
To remove the sealant canister:
1. Remove the plastic cover.
2. Unscrew the connector (B) from
the canister (A).
3. Pull up on the canister (A) to
remove it.
4. Replace with a new canister
which is available from your
dealer/retailer.
5. Push the new canister into place.
6. Screw the connector (B) to the
canister (A).
7. Slide the plastic cover back on.

Storing the Tire Sealant

and Compressor Kit

This vehicle may have a tire sealant
and compressor kit in place of a jack
or spare tire. It is located in a foam
container in the trunk.
Vehicle Care

Tire Changing

Removing the Spare Tire
and Tools
Spare Tire
1. Open the trunk. See Trunk on
page 1-8.
2. Remove the carpet.
3. Turn the center retainer
counterclockwise to remove
the spare tire cover.
4. Remove the spare tire and place
it next to the tire being changed.
9-77