Dale Tiffany TB11012 Quick Start Manual

Available languages

ASSEMBLY INSTRUCTIONS:

Item No: TB11012

1. Place the lamp base (A) on a level surface.

2. Screw column (B) into base (A).

3. Screw decorative column (C) into column (B).

4. Insert the harp (E) until it sits firmly into the saddle (D).

5. Adjust the knurl nut (F) on harp (E).

This can be used to raise the shade a little if necessary.

6. Place the shade (G) over the end of the harp (E) and

tighten the finial (H) securing the shade in place.

7. Insert the bulb into the bulb socket.

Recommended (1) maximum 60 WATT Type "A" Bulb

Or (1) maximum 23WATT CFL Bulb

(Bulb not included)

Unplug lamp, wipe with a damp cloth.

Do not use abrasives

*SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Made in China

PLEASE RETAIN ORIGINAL

PACKAGING TO MINIMIZE DAMAGE.

Revision – 04/13/12

Table of Contents

Do you have a question about the TB11012 and is the answer not in the manual?

Page 1 FOR RETURN SHIPPING PURPOSES: ASSEMBLY INSTRUCTIONS: PLEASE RETAIN ORIGINAL Item No: TB11012 PACKAGING TO MINIMIZE DAMAGE. 1. Place the lamp base (A) on a level surface. 2. Screw column (B) into base (A). 3. Screw decorative column (C) into column (B).
Page 2 INSTRUCIONES DE ASAMBLEA: PARA RAZONES DE REGRASAR: POR FAVOR CONSERVE EL IMPAQUETADO Modelo: TB11012 ORIGINAL PARA REDUCIR DAÑOS MINIMO. 1. Ponga la base (A) en una superficie plana. 2. Atornille la columna (B) en la base (A). 3. Atornille la columna decorativa (C) en la columna (B).