Radio Shack PRO-67 Operation page 30

BANK - shows which channel-storage
banks are turned on for the scan
mode.
DATA - appears when you turn on the
data skip function.
(Note: The Data Skip function
does not work in the AIR band).
AIR - appears when you search the
preset frequencies in the air
traffic search bank.
MARINE - appears when you search the
preset frequencies in the marine
service search bank.
FIRE - appears when you search the
preset frequencies in the fire
service search bank.
WX - appears when you search the
preset frequencies in the
weather service search bank.
HYPER - appears when the scanner is in
scan mode or in the Hypersearch
mode during limit and direct
search.
disappears when the scanner
searches the frequency bands
other than in 5 kHz step bands.
CH - digits that precede this
indicator show which of the
200 channels the scanner is
tuned to.
P - appears when you listen to a
priority channel.
MHz - digits that precede this
indicator show which frequency
the scanner is tuned to.
5 appears directly above the MHz
indicator when the displayed
frequency is an odd multiple of
12.5 kHz (for frequencies
between 406 MHz and 1 GHz, or
108-136.975 MHz).
SCAN - appears when you scan channels.
MAN - appears when you manually select
a channel.
PGM - appears while you program
frequencies into the scanner's
However, the indicator