M728LMR Mainboard User's Manual
Expansion Slots
This mainboard has four 32-bit PCI expansion slots and one AGP
slot.
PCI1
PCI3
PCI2
PCI4
AGP1
Use the AGP1 slot to install an AGP graphics adapter. Use the PCI
slots to install 32-bit PCI expansion cards.
Follow the steps below to install a PCI or AGP expansion card.
1. Locate the AGP or PCI slots on the mainboard.
2. Remove the slot cover for the expansion slot from the system
chassis.
3. Insert the expansion card edge connector into the slot and press
it firmly down into it so that it is fully inserted.
4. Secure the expansion card bracket to the system chassis using
the screw that held the slot cover in place.
18