Download Print this page

Catler KE 8110 CH Instruction Manual page 19

Thermo vacuum electric kettle
Hide thumbs Also See for KE 8110 CH:

Advertisement

WARNING
This appliance has
been designed only
for boiling drinking
water. Do not use
this appliance for
boiling liquids
other than water.
Before turning the
kettle on, always
make sure that the
lid is firmly closed.
Do not operate the
lid handle while
the water is being
heated or when the
heating is finished.
This could cause the
water to splash out.
Before opening the
lid, please empty
the kettle.
PROTECTION AGAINST EMPTY
OPERATION
The kettle is equipped with a safety device
to protect it against damage by overheating
and operating with insufficient amount of/
without water. If you turn the kettle on by
mistake with insufficient amount of water/no
water inside, the safety device will cut off the
power supply circuit automatically and turn
the kettle off when a certain temperature
is reached. You cannot turn the kettle back
on at this moment. Set the switch to the off
position and allow the kettle to cool down
before filling.
The kettle can be turned back on once it
has cooled down. The safety device will
reset automatically. In order to increase
the safety, the kettle is equipped with an
additional thermal fuse. Should the safety
device fail with subsequent overheating,
the kettle will automatically and irreversibly
turn off to prevent further damage. Should
such condition occur, please contact an
authorised service centre.
OPERATING YOUR KE 8110 CH KETTLE
17

Advertisement

loading