Advertisement
NOTE
Take great care while pouring water in
your cup. Never open the lid. Escaping
steam may cause burns.
Do not start or use the kettle without water.
Incorrect use of the appliance may negatively
affect its lifetime.
Thanks to the thermo insulated vacuum
layer, the boiled water will remain warm
longer in the kettle. In such condition, there
is no power consumption.
If the kettle is not to be used, unplug the
power cord from the socket. You may store
the kettle on the base if it's not to be used.
KEEP WARM FUNCTION
Press the
button and the display will
show "WARM". Press + or – to set the
temperature you want the kettle to keep for
up to 4 hours. You can set the temperature
from 40°C to 100°C. The keep warm function
will start after the set temperature flashes
three times on the display.
NOTE
It the set temperature is 100°C, the
kettle will keep the maximum water
temperature of 97°C.
You can select the keep warm function both
while the water is being heated as well as
when it's boiled.
The kettle will keep the last water
temperature set during heating except
for 100°C unless you set the required
temperature. If the last set temperature was
100°C, the kettle will keep the maximum
water temperature of 97°C.
16
OPERATING YOUR KE 8110 CH KETTLE
This is a safety protection feature to
prevent water from boiling out of the
kettle completely, which leads to the kettle
damage.
While the keep warm function is enabled, the
kettle will turn on and off regularly. This is
a normal state when water is being heated to
the set temperature.
If you remove the kettle from its base, the
keep warm function will be automatically
disabled. If you need to restore the function,
put the kettle on the base, press
display will show "WARM".
The kettle will turn off automatically after 4
hours of continuous operation in the keep
warm mode.
STANDBY MODE
The kettle will automatically switch to
standby mode after about 30 seconds of
inactivity. The display goes out in standby. To
cancel the standby mode, press any button
or lift the kettle.
NOTE
The "---" symbol on display indicates
that the kettle is not placed on the
base.
and the
Advertisement
