Advertisement
Available languages
Available languages
4.
Insert #8 3 in screw into angle bracket.
5.
Screw part way into wall to mark bracket location
6.
Unscrew & remove angle bracket.
7.
Use wall anchor at mark if no stud is present.
8.
Insert the screw tip into the anchor & rotate angle bracket into position.
9.
Secure bracket using #8 3 in. screw.
10. Repeat connection type process for opposite side.
STEP 3 - Attaching Shelf To Hardware
1.
Place shelf onto hardware.
2.
Secure shelf using #4 3/4 in. screws at all hardware locations.
STEP 4 - Attaching Angle Brackets
1.
Count over the number of slats for desired angle bracket position .
2.
Place angle bracket into position
Ensure that the angle bracket is flush with the back wall and the underside
of the front shelf rail.
3.
Insert #8 3 in. screw into angle bracket.
4.
Screw part way into wall to mark bracket location
5.
Unscrew & remove bracket.
6.
Use wall anchor at mark if no stud is present.
7.
Insert the screw tip into the anchor & rotate angle bracket into position.
8.
Secure bracket using #8 3 in. screw.
9.
Insert mushroom cap into angle bracket screw hole
10. Repeat for remaining angle bracket.
3
Advertisement
