Parking Brake - Chevrolet 2006 Monte Carlo Owner's Manual

Parking Brake

To set the parking brake, hold the brake pedal down
with your right foot. Push down the parking brake pedal
with your left foot.
The parking brake is
located to the left of the
brake pedal, near the
driver's door.
To release the parking brake, hold the brake pedal
down with your right foot and push the parking brake
pedal with your left foot. When you lift your left foot, the
parking brake pedal will follow it to the released
position.
A warning chime will sound and a brake warning light
located on the instrument panel cluster will come
on, if the parking brake is set, the ignition is on and the
shift lever is not in PARK (P).
Notice: Driving with the parking brake on can
overheat the brake system and cause premature
wear or damage to brake system parts. Verify that
the parking brake is fully released and the brake
warning light is off before driving.
If you are towing a trailer and parking on any hill, see
Towing a Trailer on page 4-36.
2-25