Back-Up Lamps
The back-up lamps are located in the rear bumper.
1. Remove the two screws from the back-up lamp
assembly.
2. Pull the assembly from the rear bumper.
3. Remove the socket by turning it counterclockwise
and pull it out.
4. Pull the old bulb straight out. Do not twist it.
5. Push the new bulb into the socket.
6. Push the socket back into the assembly. Tighten
the socket by turning it clockwise.
7. Reinstall the assembly with the two screws.
Replacement Bulbs
Exterior Lamp
Back-Up Lamp
Front Parking/Turn Signal Lamp
Headlamps
High-Beam
Low-Beam
Sidemarker Lamp
Stoplamps, Taillamps, and Turn
Signal Lamp
For replacement bulbs not listed here, contact your
dealer.
Bulb Number
921
3157
H9
H11
194
3067
5-51