Chevrolet 2006 Malibu Owner's Manual page 211

•
To play the tracks on all of the CDs that are loaded,
in random order, press and hold the RDM button
for more than two seconds. You will hear a
beep, RANDOM ALL CDS, and RDM will appear
on the display. Press RDM again to turn off random
play. RANDOM OFF will appear on the display
and RDM will disappear from the display.
x w
SEEK : Press the down arrow to go to the start
of the current track, if more than eight seconds have
played. Press the up arrow to go to the beginning of the
next track. If either arrow is held or pressed more
than once, the player will continue moving backward
or forward through the CD.
To scan the current CD, press and hold either SEEK
arrow for more than two seconds. The CD will go to
the next track, play the first 10 seconds, then go on
to the next track. Press either SEEK arrow again to
stop scanning.
To scan all of the CDs loaded, press and hold either
SEEK arrow for more than four seconds. The CD will
go to the next CD, play the first 10 seconds of the
first track, then go on to the next CD. Press either
SEEK arrow again to stop scanning.
DISP (Display): Press this knob to switch between
time, temperature, and the elapsed time of the track.
To change the default on the display (CD#/Track#/
Time, CD#/Track#/Temperature, or Track#/Elapsed
Time/Temperature), press the knob until you
see the display you want, then hold the knob for
two seconds. The radio will produce one beep and
the selected display will now be the default.
AUTO TONE/AUTO EQ (Automatic Equalization):
Press this button to select the desired equalization
setting while playing a CD. The equalization will be
set whenever a CD is played. For more information,
see "AUTO TONE" or "AUTO EQ" listed previously
in this section.
BAND: Press this button to listen to the radio when
a CD is playing. The inactive CD(s) will remain safely
inside the radio for future listening.
SRCE (Source): Press this button to play a CD
or to access the remote device, when listening to
the radio.
3-83