Table of Contents
Advertisement
To raise the seatback, do the following:
1. If your vehicle has the passenger folding seat
without an airbag, press either lever located on
the back of the seatback. Pull the seatback up
to lock it into place. Make sure the safety belt is
not twisted or caught in the seatback.
If your vehicle has the passenger folding seat with
an airbag, press the lever located on the back
of the seatback on the inboard side. Pull the
seatback up to lock it into place. Make sure the
safety belt is not twisted or caught in the seatback.
CAUTION:
{
If the seatback is not locked, it could move
forward in a sudden stop or crash. That could
cause injury to the person sitting there. Always
push and pull on the seatback to be sure it is
locked.
2. Push and pull the seatback to make sure it is
locked into place.
3. Use the reclining seatback lever to adjust the
seatback to a comfortable position. See Reclining
Seatbacks on page 1-4.
1-8
Power Lift Seat
Your vehicle may have this feature. First move the seat
forward or rearward to where you want it. See Manual
Seats on page 1-2.
The power lift seat switch is located on the outboard
side of the driver's seat. To raise or lower the seat,
press the top or bottom of the switch.
Advertisement
Chapters
Table of Contents
