Download
Share
Print this page
ABB InRouter 615 Commissioning Manual
  1. Manuals
  2. Brands
  3. ABB Manuals
  4. DC Drives
  5. InRouter 615
  6. Commissioning manual
ABB InRouter 615 Commissioning Manual

ABB InRouter 615 Commissioning Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
-
I OT O PT IONS FO R ACS 880 INDUSTR I AL DRIVES
InRouter 615
Commissioning guide
Contents
1. Introduction ................................................................................................................................... 2
2. Scope of the document ................................................................................................................ 2
3. Connecting the cabling ................................................................................................................ 2
4. Logging in and setting up the modem ....................................................................................... 5
5. Cybersecurity disclaimer ........................................................................................................... 13
EFFECTIVE
2021-10-18
OWNING ORGANIZATION
Drives Products
© Copyright 2021 ABB. All rights reserved.
DOCUMENT KIND
Instruction
STATUS
Approved
DOCUMENT ID.
3AXD50000837939
SECURITY LEVEL
Public
REV.
LANG.
PAGE
A
en
1/13

Advertisement

loading

Related Manuals for ABB InRouter 615

Summary of Contents for ABB InRouter 615

  • Page 1: Table Of Contents

    4. Logging in and setting up the modem ..................5 5. Cybersecurity disclaimer ......................13 EFFECTIVE DOCUMENT KIND STATUS SECURITY LEVEL 2021-10-18 Instruction Approved Public OWNING ORGANIZATION DOCUMENT ID. REV. LANG. PAGE Drives Products 3AXD50000837939 1/13 © Copyright 2021 ABB. All rights reserved.

  • Page 2: Introduction

    Scope of the document This document is intended for use at ABB internal factory line, where the modem and the NETA-21 gateway are commissioned. The instructions can also be used for commissioning at the customer’s site.
  • Page 3 Connect the NETA-21 ETH2 port to InRouter port 1. b) Power on the NETA-21 and wait 1 minute before connecting the PC. STATUS SECURITY LEVEL DOCUMENT ID. REV. LANG. PAGE Approved Public 3AXD50000837939 3/13 © Copyright 2021 ABB. All rights reserved.
  • Page 4 Connect the commissioning PC with an Ethernet cable to Ethernet port 4 (technically any available port 1, 2, 3, 4 works). Note: Leave the “WAN” port of the modem disconnected. STATUS SECURITY LEVEL DOCUMENT ID. REV. LANG. PAGE Approved Public 3AXD50000837939 4/13 © Copyright 2021 ABB. All rights reserved.

  • Page 5: Logging In And Setting Up The Modem

    Note: This password works only for the first login. You will change the password to the MAC address in step 5.b). c) After a successful login, you should see the modem configuration front page: STATUS SECURITY LEVEL DOCUMENT ID. REV. LANG. PAGE Approved Public 3AXD50000837939 5/13 © Copyright 2021 ABB. All rights reserved.
  • Page 6 SIM card which has PIN code checking disabled. A customer SIM card may have a preferred PIN code. a) On the Network menu, select Dialup: STATUS SECURITY LEVEL DOCUMENT ID. REV. LANG. PAGE Approved Public 3AXD50000837939 6/13 © Copyright 2021 ABB. All rights reserved.
  • Page 7 Note: Refer to the manufacturer’s website https://inhandgo.com/pages/download-center for the location of the latest modem firmware. b) Select System -> Upgrade to do the updates: STATUS SECURITY LEVEL DOCUMENT ID. REV. LANG. PAGE Approved Public 3AXD50000837939 7/13 © Copyright 2021 ABB. All rights reserved.
  • Page 8 In the System menu, select Admin Access: The figure below shows the default settings of the Admin Access window (before modifications): STATUS SECURITY LEVEL DOCUMENT ID. REV. LANG. PAGE Approved Public 3AXD50000837939 8/13 © Copyright 2021 ABB. All rights reserved.
  • Page 9 4. Check (enable) the HTTPS (preferably also only “Local access” not “Remote Access”) 5. Uncheck (disable) TELNET 6. Uncheck (disable) Console See the example below. c) Click Apply. STATUS SECURITY LEVEL DOCUMENT ID. REV. LANG. PAGE Approved Public 3AXD50000837939 9/13 © Copyright 2021 ABB. All rights reserved.
  • Page 10 You will be redirected to the login page. Make sure that the web address starts with https://. You will see a web browser warning about a self-signed certificate. d) Click Advanced (in Microsoft Edge browser). STATUS SECURITY LEVEL DOCUMENT ID. REV. LANG. PAGE Approved Public 3AXD50000837939 10/13 © Copyright 2021 ABB. All rights reserved.
  • Page 11 Finally, you will be returned to the login page using HTTPS. Enter the changed password to make sure that it works. STATUS SECURITY LEVEL DOCUMENT ID. REV. LANG. PAGE Approved Public 3AXD50000837939 11/13 © Copyright 2021 ABB. All rights reserved.
  • Page 12 6. Test the Internet with the web browser of the PC. a) When connected to the modem from a PC using wired Ethernet, disable the wireless network connection and try browsing the internet, for example https://www.abb.com. You can disable the wireless network using a keyboard shortcut (Fn + the Wi-Fi function key) or with the “Airplane mode”...

  • Page 13: Cybersecurity Disclaimer

    ABB and its affiliates are not liable for damages and/or losses related to such security breaches, any unauthorized access, interference, intrusion, leakage and/or theft of data or information.