Advertisement
4.
Logging in and setting up the modem
The following steps describe the basic settings of the InRouter for remote connectivity. The
settings allow the NETA-21 gateway to push data to the Internet. For advanced configuration
options, see the manufacturer's documentation at inhandgo.com.
1. First login
a) When the PC is connected to the modem (step 5 on page 4), navigate to
http://192.168.2.1.
b) Login with the default credentials:
– Username: adm
– Password: 123456.
Note: This password works only for the first login. You will change the password to
the MAC address in step 5.b).
c) After a successful login, you should see the modem configuration front page:
STATUS
Approved
© Copyright 2021 ABB. All rights reserved.
SECURITY LEVEL
Public
DOCUMENT ID.
3AXD50000837939
I N R O UT ER 6 1 5
REV.
LANG.
PAGE
A
en
5/13
Advertisement
