Table of Contents
Advertisement
Attaching Mounting Accessories
The monitor is designed for use with the VESA mounting system. Be careful to avoid tipping the monitor when attaching
accessories.
1. Attach eyebolts (not included) for mounting
This model is equipped with attachable eyebolts to aid in mounting.
•
Install the eyebolt brackets with the attached screws. (Recommended Fasten Force: 139 - 189 N•cm)
•
Screw the eyebolts into eyebolt holes in eyebolt brackets as shown in the picture.
•
Be sure eyebolts are secure.
•
In order to move the monitor into position, use a lifting device attached to the eyebolts.
CAUTIONN:
DO NOT mount the monitor using only the eyebolts. Eyebolts are for tentative use only.
2. Attach Mounting Accessories
Be careful to avoid tipping the monitor when attaching accessories.
VESA Mounting Interface (M8)
Mounting accessories can be attached with the monitor in the face down position. To avoid scratching the LCD panel, always
place a soft cloth, such as a blanket that is larger than the monitor's screen area, on the table before laying the monitor face
down. Make sure there is nothing on the table that can damage the monitor.
NOTEN:
Prior to installation, place the monitor face down on a flat even surface that is larger than the monitor screen.
Use a sturdy table that can easily support the weight of the monitor.
NOTEN:
You can use 600 mm/400 mm holes for mounting.
400 mm
Mounting Interface (M8)
English−17
600 mm
Advertisement
Table of Contents
