Chevrolet 2003 Monte Carlo Owner's Manual page 49

If a LATCH-type child restraint isn't attached to
its anchorage points, the restraint won't be
able to protect a child sitting there. In a crash,
the child could be seriously injured or killed.
Make sure that a LATCH-type child restraint is
properly installed using the anchorage points,
or use the vehicle's safety belts to secure the
restraint. See "Securing a Child Restraint
Designed for the LATCH System", "Securing a
Child Restraint in a Rear Outside Seat
Position" or "Securing a Child Restraint in a
Center Rear Seat Position" in the Index for
information on how to secure a child restraint
in your vehicle.
~
Securing a Child Restraint Designed
for the LATCH System
1 - Find the anchors for the seating position you want
to use, where the bottom of the seatback meets the
back of the seat cushion.
2. Put the child restraint on the seat.
3. Attach the anchor points on the child restraint to the
anchors in the vehicle. The child restraint
instructions will show you how.
4. If the child restraint
i s
forward-facing, attach the top
strap to the top strap anchor. See Top Strap on
page 1-39. Tighten the top strap according to
the child restraint instructions.
directions to be sure it is secure.
5. Push and pull the child restraint in different
To remove the child restraint, simply unhook the top
strap from the top tether anchor and then disconnect the
anchor points.
1-42