Chevrolet 2003 Monte Carlo Owner's Manual page 188

CLEAN: If this message appears on the display, the
cassette tape player needs to be cleaned. It will still play
tapes, but you should clean it as soon as possible to
prevent damage to the tapes and player. See Care
of Your Cassette Tape Player on page 3-77.
If any error occurs repeatedly or if an error can't be
corrected, contact your dealer.
CD Adapter Kits
It is possible to use a portable CD player adapter kit
with your cassette tape player after disabling the
tight/loose tape sensing feature on your tape player.
To disable the feature, use the following steps:
1.
2.
3.
4.
Turn the ignition on.
Turn the radio off.
Press and hold the TAPE CD button. The radio will
display READY and flash the cassette symbol.
Insert the adapter into the cassette slot. It will
nn\AIor
up
f h ~
radic snd hpgin pl?-;/inz.
r - - - - *
The override feature will remain active until EJT is
pressed.
Playing a Compact Disc
Insert a disc partway into the slot, label side up. The
player will pull it in and the disc should begin playing.
The display will show the CD symbol. If you want
to insert a compact disc with the ignition off, first press
DlSP or EJT.
If an error appears on the display, see "Compact Disc
Messages'' later in this section.
1 PREV (Previous): Press this pushbutton to go to the
previous track if the current track has been playing
for less than eight seconds. If pressed when the current
track has been playing for more than eight seconds,
it will go to the beginning of the current track. TRACK
and the track number will appear on the display. If
you hold this pushbutton or press it more than once, the
player will continue moving back through the disc.
2
NEXT: Press this pushbutton to go to the next
track. TRACK. The track number will appear on the
display. If you hold this pushbutton or press it more than
once, the player w ~ l l conttnue moving torwara tnrougn
the disc.
3-73